Onset HOBO UX100-014 Data Logger Driver
The HOBO UXM Single Channel Thermocouple data logger records Onset also offers a four-channel thermocouple data logger, the HOBO. Onset offers a wide range of USB-based data loggers for measuring indoors, The HOBO UX Temperature/Relative Humidity data logger records. HOBO Single Channel Thermocouple Data Logger (UXM) Manual. LOGGERS. 2 Specifications (continued). Logger.
|Supported systems:||Windows XP, Windows Vista, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10, Windows 10 64 bit|
|Price:||Free* [*Free Regsitration Required]|
Onset HOBO UX100-014 Data Logger Driver
The logger also has an internal 10K thermistor for cold-junction compensation of the thermocouple output. The thermocouple channel has a bit resolution while the internal 10K thermistor has bit resolution.
Onset HOBO UX Data Logger Firmware and related drivers
Onset HOBO UX100-014 Data Logger HOBOware, you can easily configure the logger alarm to trip for specific high or low temperatures. Or, you can set up burst logging in which the logger records data at a different interval during certain conditions. The logger can also calculate minimum, maximum, average, and standard deviation statistics. This compact data logger has a built-in LCD screen to monitor temperature, logging status, battery use, and memory consumption in between readouts. Press this button for 3 seconds Onset HOBO UX100-014 Data Logger start or stop logging data, or to resume logging on the next even logging interval.
This requires configuring the logger in HOBOware with a push button start or stop, and with Resume logging on next button push selected see Setting up the Logger.
Onset HOBO UX100-014M [UX100-014M] Type J, K, T, E, R, S, B, N Thermocouple Data Logger
Remove the battery tray on the top of the logger to access the logger battery see Battery Information. Use this button to clear a tripped alarm see Setting up Alarms or to switch between statistics, alarm readings, and the current temperature reading. Internal 10K Thermistor Temperature: The internal 10K thermistor not visible in the diagram measures ambient temperature, if the channel is configured to log in HOBOware see Setting up the Onset HOBO UX100-014 Data Logger. Use the two mounting loops to mount the logger with the hook-and-loop strap see Mounting the Logger.
This logger is equipped with an LCD screen that displays details about the current status. This example shows all symbols illuminated on the LCD screen followed by definitions of Onset HOBO UX100-014 Data Logger symbol in the table below.
If you also launched the logger with a push button start, this symbol will not appear on the display for 30 seconds. The battery indicator shows the approximate battery power remaining. The logger has been configured to stop logging when memory fills.
The memory bar indicates the approximate space remaining in the logger Onset HOBO UX100-014 Data Logger record data. When first launched, all five segments in the bar will be empty. In this example, the logger memory is almost full only one segment in the memory bar is empty. The logger has been configured to never stop logging wrapping.
The logger will continue recording data indefinitely, with newest data overwriting the oldest data. When first launched, all five segments in the memory bar will be empty. In this example, the memory is full all five segments are filled in and new data is now overwriting the oldest data.
This will continue until the logger is stopped or the battery runs out. The logger is currently logging. A sensor reading is above or below the high or low alarm that you configured.
This symbol at left will clear depending on how alarms were configured in HOBOware. If the alarm was configured to clear when the logger is relaunched, this symbol will remain on the LCD.
Onset Hobo U Type J K S T Thermocouple Data Logger eBay
An alarm is ready to be cleared. These symbols show the maximum, minimum, average, and standard deviation values most recently Onset HOBO UX100-014 Data Logger for the logger if the logging LCD Symbol Description mode has been set to Statistics in HOBOware. This is the sensor reading that tripped the alarm. This is an example of a temperature reading. Temperature units are determined by the settings in HOBOware.
Scottech - Scott Technical Instruments : HOBO UX Temp/RH Dataloggers
The display will count down in days, hours, minutes, and seconds until logging begins. In this example, 5 minutes and 38 seconds remain until logging will begin.
The launch settings are being loaded onto the logger from HOBOware.