Asrock K8Upgrade-PCIE SiS Ethernet Device Driver
Buy Asrock K8Upgrade K8 Upgrade SiS GX Socket microATX Number of PCI/PCI-Express Slots. 2. Number Realtek RTL 10/ Ethernet LAN. Download drivers for Asrock K8Upgrade-PCIE for Windows 98, Windows ME, Windows , Windows XP, Windows Server , Windows Device type: Motherboards; Manufacturer: Asrock; Model name: K8Upgrade-PCIE SiS IDE driver vera SATA R SATA R, Download MB Network adapters. RAID 0, 1, JBOD; channel Audio, 10/ Ethernet LAN; ASRock 8CH I/O: 4 ready-to-use USB ports, channel audio jack; We Provide limited free bundle of PCIE-SATA2 card once you buy our K8Upgrade-PCIE Southbridge: SiS L. Memory 2 x ATA //66 IDE connectors (supports 4 x IDE devices).
|Supported systems:||ALL Windows 32x/64x|
|Price:||Free* [*Free Regsitration Required]|
Asrock K8Upgrade-PCIE SiS Ethernet Device Driver
No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
Specifications and information contained in this manual are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this manual.
With Asrock K8Upgrade-PCIE SiS Ethernet Device to the contents of this manual, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages including damages for loss of profits, loss of business, loss of data, interruption of business and the likeeven if ASRock has been advised of the possibility of such damages arising from any defect or error in the manual or product.
Operation is subject to the following two conditions: Hardware Health Event Monitoring Screen In this manual, chapter 1 and 2 contain introduction of the motherboard and step-bystep guide to the hardware installation. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice. In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice.
Supports up to 2 Floppy Disk Drives Audio: While CPU overheat is detected, the system will automatically shutdown. Before you resume the system, please check if the CPU fan on the motherboard functions Asrock K8Upgrade-PCIE SiS Ethernet Device and unplug the power cord, then plug it back again.
To improve heat dissipation, remember to spray thermal grease between the 3. CPU and the heatsink when you install the PC system. Do NOT use a 3.
It may cause permanent damage! Power Management for USB 2. Mic In 28 1 Center: Line Out 32 31 30 29 Top: Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.
Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings. Before you install Asrock K8Upgrade-PCIE SiS Ethernet Device remove any component, ensure that the power is switched off or the power cord is detached from the power supply.
Asrock K8Upgrade K8 Upgrade SiS GX Socket microATX Audio/Video/LAN/SATA - (Discontinued)
Unplug the power cord from the wall socket before touching any component. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like.
Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. Hold components by the edges and do not touch the ICs.
Drivers and utilities for motherboards ASRock:
Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component. When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard. Position the CPU directly above the socket such that the CPU corner with the golden triangle matches the socket corner with a small triangle. Carefully insert the CPU into the socket until it fits in place.
The CPU fits only in one correct orientation. The lever clicks on the side tab to indicate that it is locked. You also need to spray thermal grease between Asrock K8Upgrade-PCIE SiS Ethernet Device CPU and the heatsink Asrock K8Upgrade-PCIE SiS Ethernet Device improve heat dissipation. Make sure that the CPU and the heatsink are securely fastened and in good contact with each other.
For proper installation, please kindly refer to the instruction manuals of the CPU fan and the heatsink.